RAPID Inver-X 11,3kW - 13,5kW with cooling
| Price without VAT: | 2 248,33 EUR / Pcs |
| ID item: | 565RIXC036 |
| Category: |
Rapid INVER-X Rapid INVER-X |
Rapid Inver-X is equipped with an inverter compressor and a fan motor, thanks to which the power input and speed of the fan is continuously regulated by electronics according to current needs. The great advantage of this system is faster heating and maintaining a constant water temperature while eliminating "cold starts", which affect the life of both heat pump components as well as the electricity load. C.O.P up to 15,5 under ideal conditions is not a business trick, but is documented certified by TÜV Rheinland.
By combining „Full-Inverter“ technology with new improved components, better heat exchange and better air circulation have been achieved. The new chassis innovated evaporator and isolated compressor ensure the ability to instantly increase heating power by 20% without increasing noise as well as energy consumption.
Three intelligent modes:
- Turbo mode: runs at 120% capacity thanks to TurboSilence technology
- Smart mode
- Silence mode
When Rapid Inver-X runs by middle and low speed to maintain the pool temperature, the compressor, and fan-run super quietly. The COP of Rapid Inver-X is up to 15,5 (at Air 26°C/Water 26°C/Humidity 80%) depends on pool size.
Cooling capacity: 5,8 kW
Product video
Technical parametres
| Product type: | Invertorové tepelné čerpadlo |
|---|---|
| Color: | Černá - Hliník |
| Digital display: | Ano |
| Heating power: | 11,3 kW |
| Cooling: | Ano |
| Cooling capacity: | 5,8 kW |
| Recommended pool volume: | 25 - 50 m3 |
| Connection: | 50 mm |
| Defrosting: | Ano |
| Rated power: | 0,22 - 1,8 kW |
| Refrigerant used: | R32 |
| Voltage: | 230 V |
| Efficiency: | až 15,5 C.O.P. |
| Body material: | Hliník |
| For salt water up to 5 g/l (<0.5%): | Ano |
| Net transport weight kg: | 61 kg |
| Net dimensions (w/l/h): | 893 x 432 x 650 mm |
| Operating temperature: | - 15 až 43 °C |
| Flow monitoring: | Ano |
| Spiral material: | Titan |
| Energy saving: | Ano |
| Rated current: | 0,96 - 7,82 A |
| Heat exchanger: | Plast |
| Recommended water flow: | 3-4 m3/h |
Logistics
| Weight: | 70 kg |
|---|---|
| In group packs: | 1 |
| On palette: | 0 |
