Heat pump RAPID INVERTER IPHC150T 60kW with cooling
| Price without VAT: | 11 352,00 EUR / Pcs |
| ID item: | 565IPHC150T |
| Category: |
Heat Pumps with Inverter Rapid Inverter with cooling Rapid Inverter s chlazením Rapid Inverter with cooling |
All devices filled with coolant of more than 5 tons CO2 equivalent must, in acordance with regulation (EU) No 517/2014 of the European Parliament and of the Council, undergo a tightness test of the cooling circuit prior to device commissioning and then every 12 months. The tightness check must be entered into the device records book.
RAPID INVERTER Professional with full inverter technology and cooling
Recommended for public pools
Rapid Inverter Professional is a full-inverter pool heat pump, powered by full-inverter compressor and full inverter fan motor, which adjusts the compressor speed hertz, and the fan speed round by round. It matches pool intelligently with continuous and optimal efficiency. The Rapid Inverter Professional heat pump allows the heating capacity from 25% to 100% automatically according to pool demand, but most of the time, it only runs by middle and low speed for maximum efficiency.
When Rapid Inverter Professional runs by middle and low speed to maintain the pool temperature, the compressor and fan run super quietly. The Rapid Inverter Professional averagely runs by COP up to 16 (at Air 26°C/Water 26°C/Humidity 80%) depends on pool size.
Energy saving – up to 2x compared to a conventional heat pump
Cooling capacity: 26,5 kW
Technical parametres
| Color: | černá |
|---|---|
| Digital display: | Ano |
| Heating power: | 60 kW |
| Cooling: | Ano |
| Recommended pool volume: | 130-260 m3 |
| Connection: | 63 mm |
| Defrosting: | Ano |
| Rated power: | 2,2-8,05 kW |
| Refrigerant used: | R410A |
| Voltage: | 400 V |
| Efficiency: | 10 C.O.P. |
| For salt water up to 5 g/l (<0.5%): | Ano |
| For salt water above 5 g/l (>0,5%)): | Ano |
| El. expansion valve: | Ano |
| Compressor: | Dvojitý rotační Built in |
| Net transport weight kg: | 212 kg |
| Net dimensions (w/l/h): | 1000x1110x1260 mm |
| Operating temperature: | -7 - 43 °C |
| Flow monitoring: | Ano |
| For sea water: | Ano |
| Pressure circuit welded with silver: | Ano |
| Material - view area: | hliníková slitina |
| Easy to install: | Ano |
| Rated current: | 3,17-12,0 A |
| Heat exchanger: | titan |
| Recommended water flow: | 12-18 m3/h |
| Digital control panel: | Ano |
Logistics
| Weight: | 245 kg |
|---|---|
| In group packs: | 1 |
| On palette: | 0 |
